Recommended useFor use on uncoated, sanded or stripped and cleaned, open-pored linoleum flooring to reduce the porosity and prime the surface to be subsequently sealed with a protective Hard Sealer or permanent PU Sealer.
Priming the surface
- Shake up Lino Primer well.
- Add Crosslinker into the primer or in a ratio of 20:1 and immediately mix thoroughly and evenly. Do not mix more than can be used within 2 hours.
- Allow the mixture to settle for 10 minutes, stir again and then it is ready to use.
- Apply Lino Primer evenly with the Aquatop Roller (minimum temp. 15°C) onto the prepared subsurface.